CLEANING TIPS
Don't wait
The longer you wait, the harder your product will be to clean.
General Clean
Always empty all remaining contents of your product before cleaning. Create a mixture of warm water and dish soap. A soft sponge or dish brush works great to clean. Make sure to scrub all parts and thoroughly rinse off with water.
Deep clean
A Baking soda and vinegar mixture will help remove tough stains. add 2 tablespoons of baking soda into the empty WYLD GEAR product. Pour in 1/4 cup of distilled white vinegar or apple cider vinegar. let the foam settle, put the lid on tight, and shake for 30 seconds After shaking thoroughly rinse off with water.
Drying
This step is easily missed, yet very important. After cleaning keep the lid off to ensure drying throughout. Drying is essential before storage, This will stop the growth of mildew.
Never
Use cleaning sprays or solutions that contain bleach. Bleach will damage and stain stainless steel. This will shorten the life of your WYLD GEAR products.
Do Not
Use steel wool or steel brushes. They will scratch the surface of your stainless steel product making it more susceptible to rusting and staining.
LID CARE
All WYLD GEAR lids are dishwasher safe and BPA free
V-Pro Slider
To clean the V-Pro Slider push up from the bottom of lid. This will pop the slide out for cleaning. Put slider back on the top of the lid and simply push down to snap slider back into place.
Mag Lids
Follow the General Clean directions above.
Multi-Can
Follow the General Clean directions above to clean the rubber can gasket lid, and the V-Pro Slider directions to clean the screw on lid.
Slim Can
Follow the General Clean Directions above to clean the Slim Can.
Straw Lids
To clean straws use the included Cleaning Brush, dish soap and water. Slide completely through straw thoroughly cleaning the inside and rinse with water when finished.
